International Lubricant Specification Advisory Committee (ILSAC) Founded in 1992, the International Lubricant Standardization and Approval Committee (ILSAC) is an organization through which Ford, General Motors, Chrysler and the Japan Automobile Manufacturers Association, Inc.
What does Ilsac mean on oil?
The two new ILSAC specifications represent the latest performance requirements for gasoline engine oils set by the International Lubricant Specification Advisory Committee (ILSAC), and API Service SP the newest API gasoline engine oil standard.
What is the meaning of Ilsac?
Acronym. Definition. ILSAC. International Lubricant Standardization and Approval Committee.
What is the difference between Ilsac and API?
ILSAC GF-6 applies to the fuel efficient viscosity grades, while API SP applies to those heavier viscosity grades like 10W40 and 20W50. API SP will be fully backward-compatible with previous API service categories, including API SN PLUS, SN, SM, SL or SJ.
What is Ilsac multigrade engine oil?
ILSAC GF-5 oils are formulated to improve fuel efficiency and provide improved performance across a wide range of areas including high temperature deposit protection for pistons, improved protection against the formation of engine sludge and protection of engines operating on ethanol-containing fuels up to E85. to show
What does Ilsac GF-5 mean?
ILSAC GF-5 defines the performance requirements for engine oils for use in 2011 model-year vehicles. Development of ILSAC GF-5 targeted three key performance improvements relative to ILSAC GF-4: (1) improved fuel economy; (2) improved engine oil robustness, in particular piston cleanliness and engine sludge protection;
What does API CJ 4 SM mean?
CJ-4 Service Category Description. API Service Category CJ-4 describes oils for use in high-speed four-stroke cycle diesel engines designed to meet 2007 model year on-highway exhaust emission standards as well as for previous model years.
What does Ilsac GF 6a mean?
GF-6 is the newest ILSAC engine oil performance standard aimed at improving fuel economy and enhancing engine capabilities for passenger cars. GF-6 will provide low-speed pre-ignition (LSPI) and timing chain wear protection while improving piston cleanliness and fuel economy.
What is dexos1 oil?
Dexos® oils are formulated exclusively with synthetics or synthetic blends. Better antioxidant technology that keeps oil from oxidizing. Dexos® oils generally have a drain interval of up to 15,000 miles. Lower viscosity that holds up to engine combustion and heat better and longer than other oils on the market.
What is SAE 5w30?
5w30 is a motor oil that is widely used in light-duty petrol and diesel engines. Like most motor oils produced today, 5w30 is a multi-grade oil, meaning it ranges from a lower viscosity grade of 5 to a higher viscosity grade of 30.
What is the highest API oil service rating for gasoline engines?
The API’s current highest rating for motor oil is SM. This oil is intended for all gasoline engines currently in use and has been the standard since 2004. For diesel engines, the current top oil rating is CI-4.
What does GF stand for in oil?
Gasoline- engine oil designations Formulated for better high-temperature deposit control and lower oil consumption. SJ Usable in all 2001 and earlier engines. GF-3 Oil meets the minimum OEM certification for 2001 gasoline engines—and all earlier models.
Can I use Ilsac GF-6?
As the successor of the ILSAC GF-5, the GF-6 will be a new industry standard and will be backwards compatible with the previous standards. This means that a GF-6 oil can be used in an engine that previously was using a GF-5 oil, as the GF-6 is simply a higher standard for the oil’s properties.
What is Ilsac oil rating?
An oil displaying this mark meets the current engine protection standard and fuel economy requirements of the International Lubricant Specification Advisory Committee (ILSAC), a joint effort of U.S. and Japanese automobile manufacturers. Automobile manufacturers recommend oils that carry the API Certification Mark.
What symbol identifies that the motor oil meets Ilsac standards?
The API “Starburst” signifies oils which meet the latest International Lubricant Specification Advisory Committee (ILSAC) standard, currently designated ILSAC GF-6A.
What does low SAPS refer to?
Low SAPS oils contain low levels of sulphated ash, phosphorus and sulfur. These oils are often recommended for diesel engines that incorporate exhaust emission control devices (DPF, TWC).
Post navigation
ncG1vNJzZmismJq2r7LIp6CtnZuewaS0xKdlnKedZL%2Bmr8ipnGiqlZaxpr7SZpiso12staLAjJ2mnqtdnrm0rcJmqq2Znpl6p7vRaA%3D%3D